RazorGage Positioners, Saw Systems & Automation Software
The RazorGage ST programmable saw stop configured with a Windows 8 Pro touch tablet.
Rearview of the RazorGage ST saw stop.
RazorGage-ST
The face of the RazorGage-ST programmable saw stop becomes an extension of the fence on your saw.  Slots in the bottom of
the extrusion (units may be flipped to work on either the right side or left side of your machine) accept standard 5/16"
carriage bolt heads for mounting to a bench, a flat table or onto the back of a roller table using optional "L" brackets.
A powerful microprocessor controlled drive motor precisely controls the position of the  carriage through a steel reinforced
cogged belt.  The carriage assembly consists of two bearing blocks fixed together riding on a precision ground hardened steel
linear rail.  This design overcomes wear and accuracy problems associated with friction-fit plastic guides used by other designs
on the market.

Our industry leading software runs on Microsoft Windows 8 Pro.  Your operator controls the RazorGage using a 10.1" Tablet PC
with color touch screen.  Touching two or three
"buttons" on the screen will command an immediate move to a position
accurate to within the thickness of a piece of paper.

Note that we use the word "accurate" rather than "repeatable".  You are buying an automated positioner to get accurate part
dimensions.  Be sure you understand the difference.

AutoList is our optional optimizing software that will turn your operation green and typically cuts down at least 30% of the
waste material compared to manual "best fit" processes.  Downloading your cut list is easily accomplished using our free Parts
List Processor software and the built in networking port or a USB flash drive.

Please
contact us or your authorized dealer today to learn more.

RazorGage-ST Brochure
57006 241st Street
Ames, IA 50010
Phone:515-232-3188
Fax:515-232-2953
RazorGage ST PC tablet software comes with easy to learn and use saw stop software.
Click on the screen below for a
virtual tour of RazorGage software
Rear view of carriage.
RazorGage ST linear positioner with optional Tower PC with 17-inch touch screen.
RazorGage ST with optional Tower PC that
runs Microsoft Windows XP Pro.  With
optional roller table and legs as shown.
Tablet PC controller
  Windows 8 Pro
By Technical Services, Inc.
The RazorGage ST can easily be added to an upcut saw or your existing saw system.
Bottom-end view of RazorGage
extrusion showing carriage bolts
inserted into slots for mounting to
table or brackets.
Connect and support the  RazorGage ST Table directly to your existing saw.
The RazorGage ST programmable saw stop can be outfitted with a label printer for part and placement identification.
Showing PC Tablet with Label
Printer and Gangstop options
Table Attach Bracket
Easy to adjust height and
front-to-back table position